OT-HOBBIES
www.ot-hobbies.com
OT-Proto1 Shield Parts Kits

  • the -MINIMUS Kit has minimal number of parts, and is especially intended for builders with a full parts bin.
  • the -MAXIMUS Kit includes many extra parts.

    OT-Proto1 - MINIMUS Kit
    (approx 60 parts total) includes:

  • OT-Proto1 Shield pcb.
  • 3.3V, 1Amp DPAK voltage regulator, plus misc parts.
  • 2/ea 3x8 0.1" male extension headers.
  • 1/ea 3x6 0.1" male extension headers.
  • 1/ea 3x4 0.1" male headers - (I2C interface).
  • 1/ea 1x24 0.1" male headers - (misc use).
  • 20/ea resistors for series-R protection of I/O pins.
  • 12/ea resistors for voltage dividers.
  • 3/ea Leds, plus misc parts.

  • Arduino 0.1" female stacking headers - (2/ea 8-pin & 6-pin).
  • OT-Proto1 - MAXIMUS Kit
    (approx 90 parts total) includes:

  • all parts for -MINIMUS Kit.

    plus:

  • 2.1mm coaxial Power Jack.
  • 1N4004 1A silicon diode - (power supply isolation).
  • 5V, 1.5A TO-220 LM317-style voltage regulator, plus heatsink.
  • misc parts for power supplies.
  • 2/ea XBee 2mm header-sockets, plus level-shifter parts.
  • 1/ea 2x4 female header - (to mount nRF2401 module).
  • 4/ea 0.1" shorting blocks.
  • 2/ea pushbutton switch.
  • 1/ea DIP8 socket - (for SRAM/EEPROM chip).
  • LM386 audio amp - (inc chip, socket, Rs, Cs, terminal block).
  • NOT INCLUDED

  • Arduino host board.
  • RF module.
  • 8-pin SRAM / EEPROM chip.

  • © OT-Hobbies, updated April 2013